Dos File Manager Windows 7

Posted onby

Note that many of these protocols might be supported, in part or in whole, by software layers below the file manager, rather than by the file manager itself; for example, the Mac OS X Finder doesn't implement those protocols, and the Windows Explorer doesn't implement most of them, they just make ordinary file system calls to access remote. You cannot format a disk or partition that is currently in use, including the partition that contains Windows. The Perform a quick format option will create a new file table, but will not fully overwrite or erase the volume.

So, if you are curious to know where is Device Manager on Windows 10, keep reading to quickly open this tool. How to Open Device Manager Using Command Prompt in Windows 10. Step 1 – Type cmd on Cortana and when Cortana displays Command Prompt in the Best match section, click on it. How to use the Windows 7 System Recovery Environment Command Prompt. From this menu use your arrow keys to select the option for the Windows System Recovery and press the Enter key on your keyboard. You should now see a black screen with a white status bar at the bottom stating Windows is loading files. Full-featured file manager for Windows with Tabs! Manage files and folders, work with archives in the formats.rar,.7z,.zip,.tar, etc., watch videos and photos, edit documents in the.txt and.rtf formats. There is a limit to the selection of the folder, available only after purchasing the Pro version of the application.

The Windows 7 System Recovery Command Prompt is a text-based console that allow you to perform maintenance and recovery tasks on your computer by typing the commands that you would like to execute. These commands allow you to perform a wide variety of tasks such as replace infected files, delete infections, repair boot up configurations for your hard drive, resize hard drive partitions, as well as many other tasks. Like the Windows Vista Recovery Command Prompt, the Windows 7 version also allows you to run graphical programs such as Notepad, Regedit, and possibly some anti-malware programs. This is a huge advantage as you now have a much larger variety of tools at your disposal to repair your computer.

In order to access the Windows 7 System Recovery Command Prompt you first need to boot your computer off of the Windows 7 DVD by inserting it into your DVD player and turning your computer on. Your computer will start and you should see the BIOS listing the hardware on your computer as well as other information. When that information has been cleared, your computer will see that a bootable DVD is inserted and present a prompt similar to Figure 1 below. If your computer does not boot off of the DVD, and instead boots directly into Windows 7, then you can read this guide on how to configure your bios to boot from a CD or DVD.

Figure 1. Boot the computer from the Windows 7 DVD

As you want to boot the computer from the Windows 7 DVD, you need to press a key on your keyboard, and any key will do, when you see the above prompt. It is possible that the DVD that came with your computer does not allow you to boot off from it. If this is the case, then your computer manufacturer most likely installed the Windows Recovery Environment directly on to a small partition on your hard drive. To access this partition, you would slowly tap the F8 key on your keyboard after the BIOS information clears from your screen until you see the Windows startup menu. From this menu use your arrow keys to select the option for the Windows System Recovery and press the Enter key on your keyboard. You should now see a black screen with a white status bar at the bottom stating Windows is loading files.... After a while, the status bar will turn completely white and you will see a screen stating that Windows is loading. The Windows 7 Setup environment will continue to load and when finished you will be presented with a screen similar to Figure 2.

Figure 2. Configure language and location options in Windows 7 Setup

At this screen you should configure the Language to install, Time and currency format, and Keyboard or input method options so that they are set correctly for your location and language. When done, please press the Next button. You will now be at the main Windows 7 setup screen where you would normally install Windows 7 on to your computer.

Figure 3. Windows 7 Install Windows screen

You should now click on the Repair your computer option, which will bring you to a new screen where the repair process will look for all Windows 7 installations on your computer. When done you will be presented with the System Recovery Options dialog box as shown in Figure 4 below.

Figure 4. System Recovery Options

Select the Windows 7 installation you would like to repair. If there are drivers that you need to load in order for Windows 7 to recognize your hard drives, click on the Load Drivers button and load the files that are needed. When ready, press the Next button to continue.

The automatic Startup Repair screen will now start and attempt to fix any issues that it detects that could cause your computer to not boot properly. This process may take some time, so please be patient while it runs. At one point, if it does not find anything, it will prompt you to perform a System Restore as shown in the image below.

Figure 5. System Restore Prompt

At this prompt press the Cancel button to continue with the automatic Startup Repair process. When the repair process has finished it will state that it cannot fix the problem and ask if you would like to submit the information to Microsoft as shown below. You should press the Don't Send button, which will then cause a screen to be shown stating that Startup Repair could not fix the problems automatically.

Figure 6. Startup Repair has finished

At this screen click on the menu item labeled View advanced options for system recovery and support. This will bring you to a screen, as shown below, where you can see a list of recovery options that are available.

Figure 7. Choose a recovery tool

Dos File Manager Windows 7

At this screen you should click on the Command Prompt option. Once you click on that option, the Command Prompt will open as shown in Figure 8 below.

Figure 8. Command Prompt in the Windows Recovery Environment

If you are unfamiliar with the Windows 7 Command Prompt, the first thing you may notice is that there is no graphical user interface, but instead there is a prompt where you will need to type in all of your commands. Though this may appear daunting, once you learn the commands to type in, you will find that the command prompt is a powerful tool for accessing files, repairing Windows, or removing malware. If you would like to learn more about the command prompt and the various commands that you can use, then please read the Introduction to the Windows Command Prompt tutorial.

It should be noted that when you boot into the Windows 7 Recovery Environment the drive letter for your Windows installation may not be the same. For example, if your Windows installation is normall on the C: drive, it may not be located at the D: drive. To determine what drive letter your Windows installation is located on, you can type this command press enter:

bcdedit find 'osdevice'

This command will display output similar to : os device partition=D:. The drive letter after partition= is the drive that your Windows installation is located. To change to that drive letter you can then type D:, or whatever other drive letter it shows, and press Enter on your keyboard.

Using the command prompt is quite simple. Simply type in the command you wish to perform and then press Enter on your keyboard. If you have entered the command properly then it will be executed and the output from the command will be displayed directly within the command prompt. A powerful feature of the System Recovery Console Command Prompt is that not only can you run run console programs, but you can also run certain Windows programs such as Notepad or an antivirus program. Unfortunately, not all Windows programs will be able to run in this environment, so you will need to test them to determine which ones will operate correctly.

To help get you started with using the Command Prompt I have listed a series of console commands that work in this environment. To get help information for each of these programs you can type the program name followed by /h and press the enter key. For example, to see the help information for the copy command you would type copy /h and then press the enter key. As more programs and commands are found they will be added to the lists below. Each of the console commands must be typed into the console in order to execute them.

attribChange permissions on files.
BootrecYou can use the Bootrec.exe tool in the Windows Recovery Environment (Windows RE) to troubleshoot and repair the master boot record (MBR), boot sector,and Boot Configuration Data (BCD) store
bcdedit Displays and allows you to change how Windows boots up. This command is useful for people who are having trouble with the Windows Boot Manager
cdChanges the current directory
chkdskChecks a hard disk for errors and attempts to repair them.
copyCopy a file from one location to another.
delDeletes a file
dirLists the files and folders in the current directory
diskpartLoad the Windows disk management program. From this program you can create, delete, shrink, and expand your existing partitions as well as get information about partitions and hard drives
icaclsChange file and folder permissions and display or modify access control lists (ACLs)
mkdirCreates a new folder
moreDisplays the content of a file one page at a time
moveMoves a file or a folder
regPerform Windows Registry operations.
renRename a file or folder
rdRemove an empty folder
typeDisplay the contents of a file
xcopyCopy a folder or files to another location
Notepad.exeOpens up the Windows Notepad so you can view and edit text files. You can also use the file browser when click the File -> Open menus to copy, move, rename, and delete files.
Regedit.exeThe Windows Registry Editor.
rstrui.exeThe System Restore console where you can restore your computer back to earlier restore points.

When you are finished using the Command Prompt you can exit it by typing exit and then pressing the Enter key on your keyboard. The command prompt will close and you will now be back at the list of available repair tools, where you can reboot your computer.

The Windows 7 System Recovery Command Prompt is such a powerful tool because you can perform actions on your files and data without having to be in Windows. This means that if you are infected with malware you can use the recovery environment to clean your computer of rootkits or malware without fear of them hindering your efforts as they will not be started.

Windows 10 File Manager

An advanced feature of the Windows 7 Recovery Command Prompt is that you can load your Windows Registry hives and then access them using Regedit. That way if you or a program has changed a setting in your Registry that does not allow you to boot up, you can fix it using the command prompt. An example of this would be when an antivirus program incorrectly fixes the Userinit key and thus you are no longer able to login to Windows. To fix this you would start the Windows Recovery Environment Command Prompt and load the hives, fix the changes, and unload them again.

This can be done using the following commands:

Type REG LOAD HKLMTempSoft <rd>:WindowsSystem32configsoftware and press Enter to load the Registry hive.

Type regedit.exe and press Enter to start the Windows Registry Editor.

Browse to HKEY_LOCAL_MACHINETempSoftMicrosoftWindows NTCurrentVersionWinlogon key within the Registry Editor.

Double-click on the Userinit value and change the data to read <sd>:Windowssystem32userinit.exe,

Exit the Windows Registry Editor.

Type REG UNLOAD HKLMTempSoft and press Enter to unload the Registry hive.

Type exit and press Enter on your keyboard and then reboot your computer.

Please note that in the above commands I have specified drive letters as <rd> and <sd>. For the purposes of this guide, <rd> stands for the drive letter of your Windows installation while in the Windows 7 Recovery Environment and should be substituted for the proper drive letter. You can use the info here to determine this drive letter. The <sd> drive letter denotes the drive that Windows is installed on when booted normally. For most people, this is typically the C: drive.

As you can see the Windows 7 Recovery Command Prompt is a powerful tool in fixing problems that would normally be unsolvable. If you find other Windows programs that work within the recovery environment, please let us know about them in the forums, so we can add them to this tutorial.

As always if you have any questions or tips on using the Windows 7 command prompt you should let us know in the Windows 7 Help Forums.

Active2 years, 6 months ago
Windows vista file manager

Is it possible to open the Windows File Explorer from the command line on Windows?

There is something similar in OSX where open . opens the Finder window on the current folder path.

Ross Ridge
29k5 gold badges50 silver badges88 bronze badges
1,7278 gold badges33 silver badges57 bronze badges

1 Answer

Either start . or explorer . will open Explorer in the current folder.

From PowerShell it's Invoke-Item ., ii ., or also explorer ..

277k67 gold badges588 silver badges618 bronze badges
Got a question that you can’t ask on public Stack Overflow? Learn more about sharing private information with Stack Overflow for Teams.

Not the answer you're looking for? Browse other questions tagged windowscmd or ask your own question.